Diameter (mm) : External 256, Internal : 144, Thickness : 4,0, Number of...
100% synthetic brake fluid on polyglycol basis for all types of...
100% synthetic brake fluid on polyglycol basis for all types of...
Diameter (mm) : External 298, Internal : 132, Thickness : 5,0, Number of...
High Performance brake bluid with very high dry boiling point of 617°F...
The upgrade choice for Superbike, Supersport and Superstock racers in...
Diameter (mm) : External 276, Internal : 144, Thickness : 4,0, Number of...
Extreme High Performance polyglycol brake fluid. Far exceeds the...
Diameter (mm) : External 276, Internal : 88, Thickness : 4,0, Number of...
No supplier
Reference: MBRAKE
Brand: Motul
High performance chlorine-free degreaser for brake discs and drums, clutches and spark plugs. The exclusive MOTUL Brake Clean formula is specially formulated to efficiently remove oil, grease, brake fluid, patches and dirt. Simplifies composition and layout of mechanical parts. Do not use on plastic and painted surfaces.
Reference: MDOT4
Brand: Motul
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations. Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Dry boiling point 245 °C / 473 °F. Wet boiling point 158 °C / 316 °F. Standards: FMVSS 116 DOT 4 & DOT 3; SAE J 1703.
Reference: MDOT51
Brand: Motul
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point 270 °C / 518 °F. Wet boiling point 185 °C / 365 °F. Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE...
Reference: MRBF600
Brand: Motul
Extreme High Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F...
Reference: MRBF660
Brand: Motul
High Performance brake bluid with very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for...